How to solder: 1. Prepare solder and soldering iron; Specially, it's necessary to keep the tip clean, which should be coated with solder. 2. Use the soldering iron to heat the weldment, such as PCB leads and pads, and keep the weldment heated evenly. 3. When the temperature is high enough, put the solder wire close to the joint, the solder will melt and flow freely. 4. Please remove the solder wire when the tin is enough. 5. Take away the soldering iron in a direction approximately 45°and power off. 6. Don't pull the soldering iron tip outward and use it in that way, which will shorten the heating element life. Specification: Cable Length: 55.0 In 140CM Working Voltage: 110V Power: 60W Temp range: 200~450℃ Stand: Steel Solder handheld : Plastic Solder wire: Sn-0.3Ag-0.7Cu-2.0%Flux-1mm dia. - 1.06 oz Soldering Iron Length: 9in How to change the tips: 1.Unscrew the locking nut that holds the tip-retaining sleeve and the original solding tip. 2.Remove the original soldering head. 3.Place the desired tip into the retaining sleeve. 4.Screw it tightly. Note: 1. When the soldering iron is plugged in for the first time, there will come out a smoke from the tip end. The smoke will stop in a short while and a smoke would never come out again. 2. For prolonging service life, please switch to the 200°C model when not using it temporarily and don't let the soldering iron stay at high temperature all the time. 3.There are 5*2interchangeable soldering tips to match all your soldering needs. Package included: 10 x Extra soldering iron tips 1 x Adjustable temperature soldering iron (60W 110V) 1 x Solder wire 1 x Stand 1 x Rosin
Trustpilot
2 months ago
2 months ago
