1.4 cue remote control system, include 4 pcs receivers, one remote transmitter ETX200-4. 2. The system has tow working modes. Single mode, Sequential mode(interval time 0.1S, 0.2S, 0.3S, 0.4S, 1.1S, 1.2S, 1.3S, 1.4S). If you buy a extra 12-buttons-transmitter(ETX2000-12) , it also has Salvo mode and Step mode. 3. Each receiver could ignite 3-5 pcs products in parallel or 6-10 pcs products in series. 4. The receiver is programmable, it learns the code of the transmitter with the button "Learn", if the receiver or the transmitter has some problem, it can be replaced with another. 5. The receiver learns the code of the transmitter to number the receivers in sequence. They work according to the sequence number while Sequential mode. 6. Test Function: The Test LED will be lit if the product is connecting well. 7. Short protection: The receiver can not be damaged by a short in cue. 8. Low voltage indication. 9. Transmitting Rang: 200 meters 10. Frequency: OOK, 433MHZ 11. CE/ FCC Passed. 12. Power supply: Receiver(not include): 9V battery Transmitter: 12V 23A battery 13. Two working modes (1) Single mode. Just the corresponding receiver ignites according to the button of the transmitter which the receiver had learned. (2) Sequential mode. Firstly, you should number the sequence of receiver while it learns the code of the transmitter, then choose which group it belongs to. The sequence number could be 1,2,3,.....48. Then press the button of the transmitter, all the cues will be ignited at a identical time interval(0.1-2.0 seconds). Switch the Function Switch of the receiver, you can set the interval time.
Trustpilot
2 months ago
1 month ago
